Inventory Valuation Methods: FIFO, Weighted Average & LIFO (With Examples)

Inventory Valuation
Inventory Valuation

Knowing how much stock your business holds is important, but knowing its actual financial value is equally essential. If you purchase the same product at different prices throughout the year, calculating closing stock using the latest purchase price may give you an inaccurate picture of your profits.

Inventory valuation helps businesses determine the financial value of unsold goods, calculate the cost of goods sold (COGS), and prepare accurate financial statements.

The most commonly discussed inventory valuation methods are FIFO (First In, First Out), LIFO (Last In, First Out), and Weighted Average Cost (WAC). However, Indian accounting standards generally permit FIFO and weighted average for interchangeable inventory, not LIFO.

This guide explains how these methods work with practical examples, their impact on business profits, and the accounting and GST rules Indian businesses should consider.

What Is Inventory Valuation?

Inventory valuation is the accounting process of determining the monetary value of unsold stock held by a business at the end of an accounting period. It considers purchase costs, production costs and other eligible expenses incurred to bring inventory to its present location and condition.

Inventory is generally recorded as a current asset on the balance sheet, while the cost of inventory sold is recognised as an expense.

For example, if a retailer has 200 units of a product purchased at different prices, inventory valuation helps determine the total cost of those remaining units rather than simply multiplying them by the latest purchase price.

Why Is Inventory Valuation Important?

Accurate stock valuation helps businesses:

  • Calculate the correct cost of goods sold.
  • Determine gross profit and profit margins.
  • Prepare accurate balance sheets and financial statements.
  • Identify damaged, obsolete and slow-moving inventory.
  • Understand how much working capital is invested in stock.
  • Support applicable accounting and tax compliance requirements.

While inventory control methods focus on managing stock quantities and availability, inventory valuation focuses on determining the financial worth of that stock.

Inventory Valuation Formula: How to Calculate Closing Stock

The basic inventory formula for calculating closing stock is:

Closing Inventory = Opening Inventory + Net Purchases + Eligible Direct Costs − Cost of Goods Sold

Where:

  • Opening inventory: Value of stock at the beginning of the accounting period.
  • Net purchases: Purchases after applicable returns, discounts and adjustments.
  • Direct costs: Eligible freight, handling and other acquisition or production costs.
  • Cost of goods sold: Cost assigned to the products sold during the period.

For manufacturers, relevant production and conversion costs must also be considered.

Inventory Valuation Example

Suppose a wholesale business has the following inventory records for a month:

Particulars

Amount

Opening inventory

₹50,000

Net purchases

₹1,20,000

Eligible direct expenses

₹5,000

Cost of goods sold

₹1,10,000

Closing inventory

₹65,000

Closing Inventory = ₹50,000 + ₹1,20,000 + ₹5,000 − ₹1,10,000

Closing Inventory = ₹65,000

The business will record ₹65,000 as closing inventory, assuming no further adjustments are required for damaged stock, obsolescence or net realisable value.

The cost assigned to goods sold depends on the inventory valuation method used.

What Are the Different Inventory Valuation Methods?

The three widely discussed methods of inventory valuation are:

  • FIFO – First In, First Out
  • LIFO – Last In, First Out
  • Weighted Average Cost Method

Specific identification is another recognised approach for individually identifiable inventory.

To understand how these methods affect closing stock, consider an electrical goods wholesaler purchasing LED bulbs at different prices.

Purchase Date

Quantity

Cost per Unit

Total Cost

1 February

100 units

₹100

₹10,000

10 February

100 units

₹120

₹12,000

20 February

100 units

₹140

₹14,000

Total

300 units

—

₹36,000

The business sells 180 units at ₹180 per unit after the final purchase.

  • Total sales revenue: ₹32,400
  • Units sold: 180
  • Remaining inventory: 120 units

Let's calculate the closing inventory and gross profit using each method.

1. FIFO Method (First In, First Out)

The FIFO method assumes that the earliest purchased or manufactured goods are assigned to sales first. The remaining inventory is valued using the costs of more recent purchases.

FIFO Calculation Example

The cost of 180 units sold is calculated as follows:

Stock Batch

Units Sold

Cost per Unit

Total Cost

1 February

100

₹100

₹10,000

10 February

80

₹120

₹9,600

Total

180

—

₹19,600

Cost of goods sold = ₹19,600

The remaining inventory consists of:

  • 20 units × ₹120 = ₹2,400
  • 100 units × ₹140 = ₹14,000

Closing inventory = ₹2,400 + ₹14,000 = ₹16,400

Gross profit = ₹32,400 − ₹19,600 = ₹12,800

FIFO closing inventory value: ₹16,400

Advantages of FIFO

  • Remaining stock reflects more recent purchase costs.
  • Suitable for businesses that maintain purchase batch records.
  • Relatively easy to understand and implement.
  • Recognised under applicable Indian accounting standards.

FIFO costing does not necessarily determine the physical order in which goods must be dispatched. For medicines, food and other expiry-based products, businesses should also consider FEFO (First Expiry, First Out) through proper batch-wise inventory management.

2. LIFO Method (Last In, First Out)

The LIFO method assumes that the most recently purchased inventory is assigned to sales first, leaving older purchase costs in closing inventory.

When purchase prices rise, LIFO generally produces a higher cost of goods sold and lower reported gross profit than FIFO.

LIFO Calculation Example

Using the same LED bulb purchase records:

Stock Batch

Units Sold

Cost per Unit

Total Cost

20 February

100

₹140

₹14,000

10 February

80

₹120

₹9,600

Total

180

—

₹23,600

Cost of goods sold = ₹23,600

The remaining inventory consists of:

  • 100 units × ₹100 = ₹10,000
  • 20 units × ₹120 = ₹2,400

Closing inventory = ₹10,000 + ₹2,400 = ₹12,400

Gross profit = ₹32,400 − ₹23,600 = ₹8,800

LIFO closing inventory value: ₹12,400

Is the LIFO Method Allowed in India?

No. LIFO is not a permitted cost formula under AS 2 or Ind AS 2 for valuing interchangeable inventory. ICDS II also prescribes FIFO or weighted average for such inventory.

Although LIFO is discussed internationally and permitted under certain foreign accounting frameworks, Indian businesses should not adopt it for statutory inventory valuation under these standards.

3. Weighted Average Cost Method

The weighted average method calculates the average cost of inventory by considering both the total cost and the quantity of goods available.

Instead of assigning different purchase prices to individual batches, it applies an average unit cost to inventory.

Weighted Average Inventory Formula

Weighted Average Cost per Unit = Total Cost of Inventory Available ÷ Total Units Available

Using the previous example:

Weighted average cost = ₹36,000 ÷ 300 units

Weighted average cost per unit = ₹120

Cost of goods sold = 180 × ₹120 = ₹21,600

Closing inventory = 120 × ₹120 = ₹14,400

Gross profit = ₹32,400 − ₹21,600 = ₹10,800

Weighted average closing inventory value: ₹14,400

Advantages of the Weighted Average Method

  • Reduces the impact of frequent purchase price fluctuations.
  • Simplifies costing for large quantities of interchangeable products.
  • Provides a consistent basis for assigning inventory costs.
  • Recognised under applicable Indian accounting standards.

Businesses can calculate weighted average costs periodically or update them after each additional purchase using the moving weighted average method.

4. Specific Identification Method

The specific identification method assigns the actual purchase or production cost to an individually identifiable inventory item.

For example, a car dealer purchases two vehicles costing ₹8,50,000 and ₹9,20,000. If the first vehicle is sold, its actual cost of ₹8,50,000 is recognised as the cost of goods sold.

This method is suitable for:

  • Automobiles
  • Unique jewellery items
  • Specialised machinery
  • Custom-made furniture
  • Individually identifiable high-value products

Unlike FIFO and weighted average, this method is intended for inventory that is not ordinarily interchangeable or is segregated for specific projects.

FIFO vs Weighted Average vs LIFO: Comparison

The following table compares all three methods using the same purchase and sales records.

Particulars

FIFO

Weighted Average

LIFO

Total inventory cost

₹36,000

₹36,000

₹36,000

Units sold

180

180

180

Remaining units

120

120

120

Sales revenue

₹32,400

₹32,400

₹32,400

Cost of goods sold

₹19,600

₹21,600

₹23,600

Closing inventory value

₹16,400

₹14,400

₹12,400

Gross profit

₹12,800

₹10,800

₹8,800

Permitted under AS 2 and Ind AS 2

Yes

Yes

No

The quantities purchased and sold remain the same across all three methods. However, the reported closing inventory and gross profit differ because each method assigns purchase costs differently.

When costs are rising, FIFO generally results in higher closing inventory and gross profit than weighted average or LIFO. These outcomes can change when purchase prices decline.

What Costs Are Included in Inventory Valuation?

The cost of inventory includes the eligible expenditure incurred to purchase, manufacture and bring goods to their current location and condition.

Cost Component

Included in Inventory Valuation?

Purchase price, net of trade discounts

Yes

Freight and inward transportation

Yes

Import duties

Yes

Non-recoverable taxes

Yes

Direct manufacturing labour

Yes

Direct raw material costs

Yes

Allocated production overheads

Yes

Recoverable GST input tax credit

No, for financial accounting

Selling and marketing expenses

No

Abnormal wastage

No

General administrative expenses unrelated to production

No

Storage costs not necessary for production

No

Correct cost classification is particularly important for manufacturers because the value of finished goods includes eligible conversion costs in addition to raw material costs.

How Is Inventory Valued Under Indian Accounting Standards?

In India, the valuation of inventory is done as per Accounting Standard 2 (AS 2) or Indian Accounting Standard 2 (Ind AS 2), depending on the accounting framework applicable to the business.

Both standards generally require inventory to be measured at the lower of cost and net realisable value (NRV).

What Is Net Realisable Value (NRV)?

Net realisable value is the estimated amount a business expects to receive from selling inventory after deducting the estimated costs required to complete and sell it.

NRV = Estimated Selling Price − Estimated Completion Costs − Estimated Selling Costs

For example, a retailer has 50 units of an electronic accessory with the following details:

Particulars

Per Unit

Original inventory cost

₹500

Estimated selling price

₹450

Estimated selling expenses

₹20

Net realisable value

₹430

Since the NRV of ₹430 is lower than the original cost of ₹500, the inventory should be valued at ₹430 per unit.

  • Original inventory value: 50 × ₹500 = ₹25,000
  • Revised inventory value: 50 × ₹430 = ₹21,500
  • Inventory write-down: ₹3,500

This prevents a business from overstating the value of stock that it can no longer sell profitably at its original cost.

Inventory Valuation Under Income Tax

For income-tax computation, businesses must consider the applicable provisions of the Income-tax Act, 2025 and Income Computation and Disclosure Standard II (ICDS II), where relevant.

Section 277 of the Income-tax Act, 2025 addresses inventory valuation and applicable adjustments relating to taxes, duties and other specified costs.

Businesses should distinguish between financial accounting valuation and income-tax computation, as adjustments may be necessary.

Inventory Valuation Under GST: How Should Businesses Calculate Closing Stock?

GST treatment depends on whether the tax paid on inventory purchases is recoverable through input tax credit (ITC).

For financial accounting purposes, recoverable GST is generally excluded from inventory cost. Non-recoverable GST generally forms part of inventory cost.

Closing Stock Valuation with GST Example

Suppose a trader purchases 100 units of a product with the following details:

Particulars

Amount

Purchase value

₹50,000

GST at 18% (assumed)

₹9,000

Total invoice value

₹59,000

Case 1: GST is fully recoverable through ITC

  • Total inventory cost: ₹50,000
  • Inventory cost per unit: ₹500
  • Closing value of 40 unsold units: ₹20,000

Case 2: GST is not recoverable through ITC

  • Total inventory cost: ₹59,000
  • Inventory cost per unit: ₹590
  • Closing value of 40 unsold units: ₹23,600

This example illustrates how ITC eligibility affects financial accounting inventory costs.

The appropriate closing stock valuation method for a GST business must also consider applicable income-tax adjustments separately.

Businesses should remember that:

  • Inventory valuation determines the accounting cost of stock, not automatically its taxable value under GST.
  • GST on outward supplies is generally calculated using the applicable transaction value and valuation provisions.
  • Goods that are lost, stolen, destroyed or written off may require ITC reversal under applicable GST provisions.
  • A reduction in inventory value does not automatically reduce GST liability.

Maintaining accurate purchase invoices, tax records and stock registers helps businesses reconcile these differences.

Which Inventory Valuation Method Is Best for Small Businesses?

There is no single valuation method that suits every business. The appropriate method depends on the nature of inventory, purchasing patterns and applicable accounting requirements.

Business Type

Suitable Costing Method

Reason

Retail stores

FIFO or weighted average

Regular purchases at different prices

FMCG distributors

FIFO

Frequent stock replenishment

Manufacturers

Weighted average or FIFO

Bulk raw material purchases

Pharmaceutical businesses

FIFO or weighted average

Batch-based stock costing, with FEFO for physical dispatch

Hardware wholesalers

Weighted average

Large volumes of interchangeable products

Automobile dealers

Specific identification

Individually identifiable vehicles

Custom machinery businesses

Specific identification

Unique product costs

When comparing FIFO vs weighted average, businesses should consider whether tracking individual purchase batches provides useful costing information or whether averaging costs offers a more practical approach.

Once a method is selected, it should be applied consistently in accordance with the applicable accounting framework.

Common Inventory Valuation Mistakes Businesses Should Avoid

Errors in inventory valuation can result in incorrect profits, inaccurate financial statements and unnecessary reconciliation work.

Using the Latest Purchase Price for All Stock

Applying the most recent purchase price to every remaining item can misstate inventory value when the business has purchased goods at different costs.

Including Recoverable GST in Inventory Cost

Including GST eligible for ITC in financial accounting inventory costs can overstate stock value and distort reported margins.

Ignoring Damaged or Obsolete Stock

Damaged, expired or outdated products may require a reduction in their recorded value based on applicable accounting requirements.

Failing to Record Purchase and Sales Returns

Unrecorded returns affect both inventory quantities and the cost assigned to remaining goods.

Frequently Changing Valuation Methods

Changing methods simply to increase or decrease reported profits can undermine the consistency and reliability of financial statements.

Not Reconciling Physical Stock with Accounting Records

Differences between actual stock and recorded quantities can make even a correctly applied valuation formula produce an inaccurate result.

Using billing software with inventory management helps businesses maintain connected purchase, sales and stock records, reducing the risk of discrepancies.

How GimBooks Helps Businesses Track Inventory Value

Manually recording purchases, sales, returns and stock adjustments becomes increasingly difficult as a business grows.

GimBooks combines billing, inventory management, bookkeeping and business reporting in one platform, helping businesses maintain organised records for inventory valuation.

With GimBooks, businesses can:

  • Record purchase and sales transactions.
  • Track available stock quantities.
  • Organise products into categories.
  • Monitor purchase and selling prices.
  • Review stock values and inventory reports.
  • Receive low-stock alerts.
  • Maintain GST-related purchase and billing records.
  • Access business information through real-time reports.

These features provide the underlying data required to calculate inventory value and reconcile closing stock.

Businesses should confirm that their chosen software costing configuration and reports align with their accountant-approved valuation method.

Track stock levels, monitor stock value and get low-stock alerts in one place. Explore GimBooks Inventory Management Software today.

Conclusion

Accurate inventory valuation helps businesses understand the actual cost of their stock, calculate gross profit correctly and prepare reliable financial statements.

While FIFO, weighted average and LIFO produce different results, Indian businesses should use cost formulas permitted under their applicable accounting standards. For most businesses dealing with interchangeable goods, FIFO and weighted average are the recognised options.

Maintaining accurate purchase prices, stock quantities, GST records and inventory adjustments throughout the year makes closing stock valuation easier and reduces year-end accounting errors.

Frequently Asked Questions

1. What is the meaning of inventory valuation?

Inventory valuation is the process of calculating the financial value of unsold stock held by a business at the end of an accounting period.

2. Valuation of inventory is done as per which accounting standard?

Inventory valuation is done as per Accounting Standard 2 (AS 2) or Indian Accounting Standard 2 (Ind AS 2), depending on the accounting framework applicable to the business. Inventory is generally measured at the lower of cost and net realisable value.

3. What are the three main inventory valuation methods?

The three commonly discussed methods are FIFO, LIFO and weighted average cost. However, LIFO is not permitted under AS 2 or Ind AS 2 for interchangeable inventory in India.

4. What is the formula for inventory valuation?

The basic closing inventory formula is:

Closing Inventory = Opening Inventory + Net Purchases + Eligible Direct Costs − Cost of Goods Sold.

The method used to assign costs and any applicable valuation adjustments determine the final inventory value.

5. Which is better: FIFO or weighted average?

FIFO is suitable for businesses that track inventory purchase batches, while weighted average is useful for businesses purchasing interchangeable goods at frequently changing prices. The appropriate method depends on the nature of the inventory and applicable accounting requirements.

6. Is the LIFO method allowed in India?

No. LIFO is not permitted under AS 2, Ind AS 2 or ICDS II as a cost formula for interchangeable inventory.

7. Is GST included in closing stock valuation?

For financial accounting, GST recoverable through input tax credit is generally excluded from inventory cost. Non-recoverable GST generally forms part of inventory cost. Separate adjustments may be required for income-tax computation.

8. How does inventory valuation affect profit?

Inventory valuation determines the cost assigned to goods sold. A higher closing inventory value generally results in lower cost of goods sold and higher gross profit, assuming other factors remain unchanged.

9. How often should a business calculate inventory value?

Businesses should value inventory at the end of each applicable financial reporting period. Monthly inventory reviews can also help identify stock discrepancies, changes in costs and slow-moving products before year-end.